M7 Bayonet Handle Grip New-Old Stock (NOS) Screw And Washer (lots Of 2)

• Popularity - 13186 views, 1883.7 views per day, 7 days on eBay. Super high amount of views. 259 sold.
• Price - Avg: $0.00, Low: $0.00, High: $0.00. Best quality when compared to PicClick similar items.
• Seller - + items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.

M7 Bayonet Handle Grip New-Old Stock (NOS) screw & washer (lots of 2)<br>This listing is for two M7 Bayonet grips screws and washers.  Tested on the M7 Bayonet and they are a perfect fit.  These screws and washers are new and unissued.  Screws will also fit the M6 Bayonet.<br>(You will receive two (2) screws and two (2) washers for a total of four (4) individual pieces).<br>Pictures listed will not be the exact item you receive, but are shown as stock photos only.<br>Screw NSN: 5305-00-051-3609<br>Washer NSN: 5310-00-579-0079<br>Technical Data | NSN 5305-00-051-3609<br>Characteristic<br>Specifications<br>THREAD SERIES DESIGNATOR<br>UNC<br>NOMINAL THREAD DIAMETER<br>0.138 INCHES<br>THREAD QUANTITY PER INCH<br>32<br>THREAD CLASS<br>2A<br>THREAD DIRECTION<br>RIGHT-HAND<br>THREAD LENGTH<br>0.647 INCHES MINIMUM AND 0.687 INCHES MAXIMUM<br>FASTENER LENGTH<br>0.750 INCHES NOMINAL<br>SCREW MATERIAL<br>STEEL<br>SCREW SURFACE TREATMENT<br>PHOSPHATE<br>HEAD STYLE<br>A38 FLAT CHAMFER<br>HEAD DIAMETER<br>0.226 INCHES NOMINAL<br>HEAD HEIGHT<br>0.132 INCHES NOMINAL<br>INTERNAL DRIVE STYLE<br>B10 SLOT<br>MANUFACTURERS CODE<br>19204<br>DESIGN CONTROL REFERENCE<br>11010078<br>Technical Data | NSN 5310-00-579-0079<br>Characteristic<br>Specifications<br>MATERIAL<br>STEEL COMP 1050 OR STEEL COMP 1551 OR STEEL COMP 1059 OR STEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OVERALL<br>MATERIAL DOCUMENT AND CLASSIFICATION<br>66 FED STD ALL MATERIAL RESPONSES OVERALL<br>SURFACE TREATMENT<br>CADMIUM AND CHROMATE OVERALL<br>SURFACE TREATMENT DOCUMENT AND CLASSIFICATION<br>QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL<br>HARDNESS RATING<br>40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM<br>STYLE DESIGNATOR<br>101 FLAT INTERNAL TEETH<br>HOLE DIAMETER<br>0.141 INCHES MINIMUM AND 0.150 INCHES MAXIMUM<br>OUTSIDE DIAMETER<br>0.275 INCHES MINIMUM AND 0.295 INCHES MAXIMUM<br>MATERIAL THICKNESS<br>0.017 INCHES MINIMUM AND 0.021 INCHES MAXIMUM<br>MANUFACTURERS CODE<br>81349<br>NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE<br>MILW6986<br>